Licensed & Insured, in Waco and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in Waco
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (254) 384-8413 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in Waco and surrounding areas · On-site visits included · Free estimate within 24h
Waco Metal Roofing is a team of local certified professionals based in Waco. We respond quickly in Waco and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (254) 384-8413⭐⭐⭐⭐⭐ 4.9/5 · 349 verified Google reviews
“Our old barn roof was rusted through in spots and we needed it redone before hay season. The crew knocked out the whole agricultural building in about three days and the new panels look sharp. They hauled off every last scrap of the old metal, which I appreciated.”
Commercial & Agricultural Metal Roofing
“We wanted copper on our brick house and honestly weren't sure anyone local would take it on. Waco Metal Roofing handled the whole thing beautifully, the seams are clean and the flashing around the chimney is flawless. Worth every penny for how it looks on the brick.”
Copper & Specialty Metal Roofing
“Needed a metal shop building put up on our rural property and these guys delivered. Solid structure, straight panels, and they finished ahead of schedule. One small thing, a couple of screws needed tightening after the first big rain, but they came right back out and fixed it no charge.”
Commercial & Agricultural Metal Roofing
“Standing seam on our house and it turned out gorgeous. Crew of four, done in two days, and they swept the driveway clean before they left. Couldn't be happier with how it handles the Texas sun.”
Standing Seam Metal Roofing
“Had a leak that showed up right where a pole comes through the roof, and two other outfits couldn't figure it out. These folks found the failing seal, redid the flashing, and we've been bone dry through every storm since. Relieved is an understatement.”
Metal Roof Leak Repair
“New metal roof on our place and the whole experience was painless. They walked me through panel options, gave a fair quote, and the install crew was respectful and tidy. It's been through a couple of good hail storms already and not a dent.”
Metal Roof Installation
“We built a modern-style new home and wanted a clean metal roof to match the look. Waco Metal Roofing worked with our builder and nailed the low-profile finish we were after. The lines are crisp and the color is exactly what we picked.”
Metal Roof Installation
“We went with the metal-over-shingles retrofit on our house to save some money and avoid a tear-off. The crew was professional and the finished roof looks great. Only gripe is the job ran a week longer than quoted, but they kept us posted the whole time.”
Metal Roof Over Shingles (Retrofit)Real photos of our work in Waco · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed fastener panel install | Starting at $8/sq ft | Includes synthetic underlayment, standard flashing, and screw-down panels; price rises with roof pitch and complexity. |
| Standing seam install | Starting at $12/sq ft | Hidden clips and raised seams; cost moves with panel gauge, seam height, and roof geometry. |
| Metal shingle or stone-coated steel | Starting at $14/sq ft | Textured or stamped panels; price depends on profile, color availability, and cutting waste. |
| Tear-off and deck repair | On estimate | Number of existing shingle layers and condition of sheathing must be seen before pricing. |
| Travel | Included | In Waco and surrounding McLennan County areas, with no separate call-out or mileage fee. |
| Estimate | Free | On-site walk and written scope at (254) 384-8413, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Snap-lock standing seam | Starting at $10/sq ft | Includes concealed clips, underlayment, and standard trim on simple gable roofs. |
| Mechanically seamed panel | Starting at $13/sq ft | Includes motorized seaming, engineered clip spacing, and matched rake and eave trim. |
| Class 4 impact panel | Starting at $15/sq ft | Includes heavier gauge hail-rated steel and concealed clips for McLennan County storm exposure. |
| Tear-off and deck repair | On estimate | Needs an on-site look at sheathing condition, layers, and access before pricing. |
| Travel | Included | In Waco and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (254) 384-8413, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Full tear-off and metal replacement | Starting at $9/sq ft | Includes tear-off, decking inspection, haul-away, and impact-rated panel install; roof complexity moves the price. |
| Standing seam replacement | Starting at $12/sq ft | Concealed-fastener system with clean lines; steeper pitches and multiple valleys raise the per-foot rate. |
| Stone-coated steel replacement | Starting at $11/sq ft | Steel shingle or tile profile for historic and HOA homes; profile choice and trim details affect cost. |
| Decking repair (as needed) | On estimate | Priced after tear-off reveals soft sheathing; we photograph the damage before replacing anything. |
| Estimate | Free | On-site roof walk and written scope, response within 24 hours at (254) 384-8413, no obligation. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Retrofit over one shingle layer, simple gable | Starting at $7/sq ft | Includes slip sheet, purlins, trim, and panel install on an accessible single-story roof. |
| Retrofit with standing seam panels | Starting at $11/sq ft | Concealed fasteners and raised seams; price rises with roof complexity and pitch. |
| Retrofit with stone-coated steel | Starting at $10/sq ft | Textured Class 4 panels; cost moves with the profile and the number of valleys and hips. |
| Deck repair or partial redeck | Quoted per project | Priced by the sheet after we probe the deck; rotten sheathing must be replaced before covering. |
| Complex or two-story job | On estimate | Steep pitch, multiple penetrations, and chimney flashing need an on-site look before we quote. |
| Estimate | Free | On-site deck check and written scope, response within 24 hours at (254) 384-8413. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Minor fastener and sealant repair | Starting at $450 | Covers small fastener and sealant repairs, resealing penetrations, and a written report on roof condition |
| Panel or flashing repair | Starting at $850 | Includes replacement of damaged panels or flashing, matching materials, and water testing of the repair |
| Storm damage repair | On estimate | Needs an on-site inspection to document hail or wind damage and scope the full repair |
| Travel | Included | In Waco and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (254) 384-8413, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Minor leak repair (flashing, boot, small seal) | Starting at $450 | Covers diagnosis and a straightforward fix such as a failed pipe boot or small flashing gap. |
| Fastener replacement and re-fastening | Starting at $650 | Includes pulling worn screws and installing new fasteners with fresh washers across the affected panel run. |
| Multi-point or hard-to-access leak | Starting at $900 | For steep roofs, tall two-stories, or several separate leaks that each need tracing and repair. |
| Emergency tarping after a storm | Starting at $350 | Temporary secure cover over an open breach, with permanent repair scheduled separately. |
| Complex or large-scale repair | On estimate | Panel replacement or widespread damage needs an on-site look before we quote a number. |
| Estimate | Free | Response within 24 hours at (254) 384-8413, with no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Washer-only swap (small roof) | Starting at $750 | Covers replacing cracked washers on a typical single-story Waco ranch, with screw count and access driving the final price. |
| Full screw replacement (residential) | Starting at $1,450 | Includes pulling and replacing all failed fasteners with new washers, priced by total screw count and roof pitch. |
| Oversized re-fastening (barns and shops) | Starting at $2,200 | Steps up to #14 or #16 screws on wallowed holes, with panel condition and square footage moving the number. |
| Lap and penetration re-seal add-on | Starting at $450 | Re-seals vents, boots, and laps around active leaks, with the number of penetrations setting the scope. |
| Complex or large-scale job | On estimate | Steep two-stories, heavy rust, or commercial roofs need an on-site walk before we quote a number. |
| Estimate | Free | Response within 24 hours at (254) 384-8413, no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Ribbed panel re-roof (R-panel) | Starting at $5.50/sq ft | Includes panels, screws, closures, and trim on a standard gable roof with normal access. |
| Corrugated panel install | Starting at $5.75/sq ft | Classic corrugated profile with underlayment, sized to purlin spacing and eave height. |
| Over existing shingles (retrofit) | Starting at $6.25/sq ft | Battens, underlayment, and ribbed panels over one layer of shingles where code allows. |
| Barn, shop, or carport | On estimate | Span, purlin condition, and eave height need an on-site look before pricing. |
| Travel | Included | In Waco and surrounding McLennan County areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (254) 384-8413, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standard metal shingle roof installation | Starting at $9/sq ft | Includes tear-off, underlayment, and standard flashing; price rises with roof pitch and complexity. |
| Premium stone-coated steel shingles | Starting at $12/sq ft | Textured shake or tile look; cost increases with premium colors and steeper roof pitches. |
| Retrofit over existing shingles | Starting at $8/sq ft | Installed over prepared existing roof where code allows; savings depend on existing layer count. |
| Complex or large-scale job | On estimate | Multiple valleys, dormers, or chimneys require an on-site inspection to price accurately. |
| Travel | Included | In Waco and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (254) 384-8413, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stone-coated steel, shingle profile | Starting at $9/sq ft | Includes tear-off, underlayment, panels, and standard trim on a simple gable roof. |
| Stone-coated steel, shake profile | Starting at $11/sq ft | Textured shake look with deeper shadow lines, priced higher for the profile and trim work. |
| Stone-coated steel, tile profile | Starting at $12/sq ft | Tile-look panels with curved profiles, more cuts and accessories raise the per-foot cost. |
| Retrofit over existing shingles | Starting at $8/sq ft | Panels over one existing shingle layer where code allows, saves on tear-off and disposal. |
| Complex or steep roof | On estimate | Multiple valleys, dormers, and steep pitch need an on-site look before pricing. |
| Estimate | Free | Response within 24 hours at (254) 384-8413, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Aluminum accent and porch roof | Starting at $20/sq ft | Includes formed panels and flashings; complexity of the roof shape moves the price up |
| Zinc standing seam or flat lock | Starting at $28/sq ft | Includes pre-weathered zinc and custom terminations; height and access add labor |
| Soldered copper roof | Starting at $35/sq ft | Includes hand-formed pans and soldered seams; turrets and bays raise fabrication time |
| Full architectural copper roof | On estimate | Needs an on-site look because geometry, flashing count and historic review vary widely |
| Travel | Included | In Waco and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (254) 384-8413, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Reflective coating on a sound, chalked roof | Starting at $2.50/sq ft | Includes pressure wash, prep, and one reflective coating system. Rust severity and roof pitch move the price. |
| Rust treatment and full coating system | Starting at $3.75/sq ft | Adds grinding, rust converter, spot primer, and topcoat. Heavy rust at fasteners and cut edges drives cost. |
| Barn, shop, or agricultural building | Starting at $2.25/sq ft | Larger roof area lowers the per-square-foot rate. Access, height, and panel condition affect the final number. |
| Complex or steep roof | On estimate | Cut-up rooflines, steep pitch, and multiple penetrations need an on-site look before we quote a number. |
| Travel | Included | In Waco and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (254) 384-8413, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Vent boot or single penetration flashing | Starting at $600 | Includes removal of failed boot or flashing, new bent metal or boot, and water test on one penetration |
| Chimney counterflashing rebuild | Starting at $1,100 | Includes reglet cut, new bent counterflashing, masonry seal, and full water test at the chimney |
| Skylight curb re-flash | Starting at $1,400 | Includes curb repair or rebuild, cricket on upslope side, and new flashing on all four sides |
| Multiple penetrations or valley metal | On estimate | Scope depends on number of penetrations, roof pitch, height, and whether decking needs replacement |
| Travel | Included | in Waco and surrounding McLennan County communities, no separate call-out or mileage fee |
| Estimate | Free | Response within 24 hours at (254) 384-8413, no obligation to book the repair |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Partial guard row, single story | Starting at $1,200 | One short clamp-on row over an entry or stoop, normal access, standard standing seam profile. |
| Multiple drop zones | Starting at $1,650 | Two or more guard rows over steps, condensers, and walkways, priced by total run length. |
| Two-story or steep slope | Starting at $1,950 | Higher roof, steeper pitch, and fall protection add labor and setup time to the base rate. |
| Surface-mounted on exposed fastener | Starting at $1,450 | Sealed fasteners set into purlins on corrugated or ribbed roofs, including barns and shops. |
| Complex or large-scale job | On estimate | Long runs, mixed profiles, or lift access need an on-site look before we quote a number. |
| Estimate | Free | Response within 24 hours at (254) 384-8413, no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Roof inspection and damage assessment | Free | Photo documentation, panel and fastener check, written repair vs. replace finding |
| Minor repair (fasteners, washers, small flashing) | Starting at $350 | Screw replacement, washer replacement, and resealing at penetrations, priced by count |
| Panel replacement (isolated damage) | Starting at $850 | Includes panel match, removal, and install; profile availability and roof pitch move the price |
| Partial or full re-roof after storm damage | On estimate | Scope depends on deck condition, panel profile, flashing rebuild, and access |
| Insurance claim documentation | Included | Measurements, photos, and written scope you can hand to your adjuster |
| Travel | Included | in Waco and surrounding areas, no separate call-out or mileage fee |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Basic roof inspection | Free estimate | On-roof walk, fastener and seam check, written summary with photos included |
| Full inspection with report | Starting at $250 | Detailed photo documentation and remaining service life rating, price rises with roof height and pitch |
| Insurance documentation package | On estimate | Hail and wind damage photo evidence for an adjuster, scope depends on roof size and damage extent |
| Travel | Included | in Waco and surrounding McLennan County areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (254) 384-8413, no obligation to book the inspection |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| 5-inch seamless K-style gutter | Starting at $9/linear ft | Includes on-site forming, hidden hangers, and standard downspouts; tree cover and run length move the price. |
| 6-inch or half-round seamless gutter | Starting at $13/linear ft | Higher capacity or period profile for steep roofs and historic homes; access and hanger type affect cost. |
| Leaf guard installation | Starting at $6/linear ft | Micro-mesh or screen fitted to new or existing gutters; heavy pecan and live oak cover raises maintenance needs. |
| Downspout addition or upsizing | Starting at $95 each | Includes 3x4 downspout, elbows, and splash block; long runs and second-story drops take more labor. |
| Complex or large-scale job | On estimate | Multi-story homes, box gutters, and fascia repair need an on-site look before we quote a firm number. |
| Estimate | Free | Response within 24 hours at (254) 384-8413, with no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Repair or re-fastening (small building) | Free estimate | Covers screw and washer replacement, closures, and minor flashing on a sound panel roof. |
| Ribbed exposed-fastener re-roof | Starting at $3.50 per sq ft | Includes panels, fasteners, and basic trim; pitch and deck condition move the price. |
| Standing seam commercial roof | Starting at $7.00 per sq ft | Concealed fasteners and full trim; insulation and roof height raise the figure. |
| Large ag or commercial building | On estimate | Big square footage and complex flashing need an on-site look before pricing. |
| Travel | Included | In Waco and surrounding McLennan County towns, with no separate mileage fee. |
| Estimate | Free | Response within 24 hours at (254) 384-8413, with no obligation to book. |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in Waco need a crew that understands how this climate and housing stock actually behave. Waco Metal Roofing works through a network of licensed, bonded, and insured local contractors who install, replace, re-roof, and repair metal roofs on the Victorians and Craftsmans near Baylor, the brick ranches across north and south Waco, the two-story homes in Woodway and Hewitt, and the farmhouse-style builds that have become a local signature. We also serve Robinson and Bellmead and the surrounding McLennan County communities.
The work here is shaped by intense sun, spring supercells with large hail, straight-line winds, and the occasional hard freeze. Older exposed-fastener roofs are common, and their fasteners and washers are often reaching the end of their service life. Whether you need a metal roof installation or a targeted repair, we start with a straight assessment, not a sales pitch.
Most metal roof leaks we see in Waco trace back to a handful of predictable failures. On 15 to 30 year old exposed-fastener roofs, the number one cause is fasteners backing out as the EPDM sealing washers dry, shrink, and crack. Once that seal is gone, water works past the screw head and into the assembly. Seam separation from thermal movement is another common source, especially on long panels that expand and contract through hot summers and hard freezes. Failed pipe boots and flashing at chimneys, skylights, and valleys let water in at the most vulnerable transitions, and wind-lifted panels or punctures from fallen limbs open the roof outright.
Ignoring a small leak is expensive. Water tracks along purlins and decking far from the entry point, so the stain on your ceiling may be nowhere near the actual breach. By the time it shows, sheathing can be rotted and insulation saturated. That is why we trace the leak to its source rather than patching the symptom, and why our metal roof leak repair work starts with a proper inspection.
The honest repair-versus-replace call matters here. If the panels are sound and the problem is fasteners, a full screw replacement with new sealing washers often restores a watertight roof for a fraction of replacement cost. If the panels are corroded through or the deck is failing, repair money is better spent toward a replacement. We will tell you plainly which one you are facing. Call (254) 384-8413 or request a free estimate.
We install the full range of metal systems and match the roof to the building, not the other way around. Standing Seam Metal Roofing uses concealed clips and no exposed fasteners, which makes it the premium choice for a primary residence. Corrugated & Ribbed Panel Roofing is the economical workhorse for barns, shops, and outbuildings. We also install Metal Shingle Roofing, Stone-Coated Steel Roofing, and Copper & Specialty Metal Roofing for accents and historic profiles.
The tradeoff is simple: standing seam costs more up front and has no exposed screws to maintain, while screw-down costs less and needs its fasteners serviced over its life. When the deck is sound, Metal Roof Over Shingles (Retrofit) can be a legitimate option. When it is not, tear-off is the right call.
Metal roof projects are typically quoted per square foot for installations, while repairs are often flat-rate. The final number depends on the panel system and metal gauge, roof pitch and complexity, whether we tear off or recover, the condition of the decking, and site access. Because those variables move so much, we give typical ranges rather than fixed figures, and final pricing depends on the roof and site conditions.
Some carriers may offer premium discounts for metal or impact-rated roofs, though that is between you and your insurer. For a clearer picture, see our pricing page, then request a free estimate or free roof inspection so we can price your actual roof.
After a storm, we inspect the roof and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent, coverage decisions rest with your carrier, and we make no promise that a claim will be approved. Our role is to document what we find accurately and let the process work.
On permits, this is informational only. In most jurisdictions a permit is commonly required for a full replacement or re-roof, but requirements vary by city, and thresholds, fees, and inspection requirements differ. Historic district or HOA design review can also restrict panel profile and color choices. Requirements vary, always verify with the Waco building or planning department before starting your project. To schedule an inspection, contact us.
Ready to get started? Waco Metal Roofing serves in Waco and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in Waco · Response within 24h · No commitment · ☎ (254) 384-8413
Your Free Quote Request